Hantek 1008C/1008A 8 Channels Automotive Diagnosis Equipment - 1008A

Standard equipped over 80 types of automotive measurement function (Ignition Action/The Sensor/Bus Diagnosis/Performer/StartupCharge) USB 2.0 interface plug and play and need no extra power supply Support tablet PC Support WIN10/ WIN8/WIN7 etc.

Free software upgrading constantly higher cost performance Support USBXI easy to operate.

8 isolated channels oscilloscope 2.4MSa/s real time sampling rate 10mV/div to 5V/div high input sensitivity and large input range 100kHz high bandwidth small size easy to carry.

Dynamic cursor tracking waveform record and replay function.

Features:

8 channels automotive diagnosis oscilloscope for vehicle testing.

Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus Detection/Actuator/Start and Charge etc).

Video help function provides the video help of automobile testing which can watch online.

The diagnostic results support the generation of diagnostic reports printing with one click screenshots and many other methods to save the data.

Support waveform recording can be long time recording waveform. It can simulate camshaft and crankshaft signal.

Transmit signals through USB 2.0 interface plug and play and no need extra power supply.

Specifications:

Brand: Hantek

Model: 1008A 

Function Difference: Test the Car Engine Ignition(1008C) / NO (1008A)

Analog Channel: 8Bandwidth: 100kHz

Input Impedance:

Resistance: 1MΩ

Input Sensitivity: 10mV/div to 5V/div

Input Coupling: DC

Resolution: 12 bits

Memory Depth: 4KMax Input: 400V (DC+AC Peak)

Sampling Rate: 2.4MSa/s

Material: Plastic

Item Size: Approx. 225 * 185 * 45mm / 8.9 * 7.3 * 1.8in

Item Weight: Approx. 623g / 22.0oz

Package Size: Approx. 27.5 * 23.5 * 10cm / 10.8 * 9.3 * 3.9in

Package Weight: Approx. 1498g / 52.8oz

General Oscilloscope: Hantek1008A

Analog Channel 8 Input Impedance Resistance: 1M?

Input Sensitivity 10mV/div to 5V/div Input Coupling DC Resolution 12 bits Memory Depth 4K Max.

Input 400V (DC+AC Peak) Real-Time Sampling Rate 2.4MSa/s Time Base Range 1ns/div to 20000s/div(1-2-5sequences) Automotive Measurement Function Intake manifold vacuum ignition Petrol fumes adjusting valve vacuum ignition Idle exhaust ignition Starting exhaust ignition;

Sensor: Air Flow Meter Camshaft Crankshaft Distributor Lambda sensor Throttle position; CAN bus data examine CAN bus signal integrity CAN bus LH long time acquisition LIN bus;

Performer: Petrol/Diesel; Starter and charging circuits Time Base Precision 50ppm Trigger Source CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 Trigger Mode Edge X-Axis Input CH1 Y-Axis Input CH2

Voltage Measurement Vpp Vamp Vmax Vmin Vtop Vmid Vbase Vavg Vrms Vcrms Preshoot Overshoot Time Measurement Frequency Period Rise Time Fall Time Positive Width Negative Width Duty Cycle Cursors Measurement Horizontal Vertical Track Auto Measure Modes Waveform Signal Process + - x FFT Invert

Voltage Range 10mV to 5V/div @ x 1 probe 100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1

Current Range 100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1Ato100.0A/div @ CC650(60A) 1Ato200.0A/div @CC1100(100A) 10Ato2000.0A/div @CC1100(1100A) FFT

Rectangular Hanning Hamming Blackman Window Math Addition subtraction multiplication division Interface USB 2.0(Full Speed) Power No need extra power supply High pressure ignition probe Only Hantek1008C Programmable Signal Generator Channel 8CH Output Level LVTTL

Frequency Range 0-250kHz Note: Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product.

Package List:

1 * Car Diagnostic Oscilloscope

1 * Auto High-Pressure Ignition Probe(Only 1008C)

8 * BNC to Crocodile Clip Test Line

1 * USB Power Line

1 * Storage Case

1 * Software CD with User Manual